Your supplier for modern equipment for treatment of meat and progressed technique in scale ice
 
 
Bandentschwarter für Industrie Kombinierte Bandentschwarter  
  • Skinning machine for conveyor system, for industry
    CORTEX CB 595 / 695 / 795
     
     
  • Skinning machine
    for conveyer system,
    for medium companies and industry
    ECONOMY CB 435
    CORTEX CB 495 /
    CB 495-5
     
     
  • Skinning machine for conveyor system /
    Membrane removing machine
    COMBI-NOCK
    CBV 435 / CBV 495
     
     
  • Skinning machine for poultry CB 460
The skinning machines for conveyor system type CB 595 / 695 / 795 are the most prefered machines for large and medium companies of the meat treating industry. They are available in three different working widths (500 mm, 600 mm, 700 mm) and are used for the skinning of all kinds of bacon. Furthermore with this machine you may cut sides of bacon and slices of meat. A robust construction, easy handling and a very high hygiene standard - there is anything else you may require.
 
The skinning machines for conveyor system type Economy CB 435 / CB 495 / CB 495-5 are machines which have been developped according to the requirements of the smaller companies and which distinguish themselves by highest reliability and low costs. The treatment of flat pieces of meat is made by conveyor belt, which may be replaced by a working table when round pieces of meat are to be treated. This machines can also be delivered with an additional conveyor belt for removal. The operation area of this machine and the performance of these machines are comparable to the machines for industry.
 
The skinning machine for conveyor system / membrane removing machine typ Combi-Nock CBV 435 / CBV 495 is a machine for three different operations, which means a considerable reduce of operating costs.
We have developped from the types Economy CB 435 / Cortex CB 495 and Vliesex V 460, which will still remain in our range of programme, a new combined machine for the open (manual) skinning and skinning with conveyor system as well as the membrane removing. This machine has all capacity features of a skinning machine for conveyor system and a membrane removing machine.
The machine is convertible without any tools in seconds. When working with the conveyor system pieces of meat up to a height of 90 mm may be treated. Larger pieces as ham, knuckles of porc etc, are skinned manually. After conversation of the motor and one lever the Combi-Nock is a full valid membrane removing machine. The remove of sinews and membrane is done very carefully and by this increase the value of the treated meat.
 
 
Fischenthäuter Entflieser  
  • Derinding machine
    Cortex
    C 460 / C 560
     
     
  • Skinning machine for fish
    Cortex
    CF 460 / CF 560
     
     
  • Membrane removing machine
    Vliesex V 460 / V 560
The derinding machines Cortex C 460 / Cortex C 560 are machines which can be used in all types and sizes of meat treating companies for the manual derinding of all round and shapeless pieces of meat, as for example knuckles of pork, ham etc.
The skinning machines for fish type CF 460 / CF 560 are equipped with water cleaning system.
 
The membrane removing machines type Vliesex V 460 / V 560 are used for the membrane removing of beef and pork and for game. The remove of sinews and membrane is done very carefully through adjustable spring pressure. A very effective cleaning system grants a very high hygienic standard at a low effort.
Scherbeneiserzeuger Scherbeneiserzeuger  
  • Scale ice makers NSH
     
     
  • The new generation with a daily output of 65 kg up to 4000 kg scale ice
The Scale ice makers NSH are working with a closed and thight evaporating system, so that no coolant can escape and the refilling of coolant is not necassary. The water which is required for the production of ice is brought directly, without water tank, on the cooling disc by this the formation of bacteria in the water is considerably reduced. The scale ice makers are produced with a daily output of scale ice of 65 kg up to 4000 kg.
 

 
ERNST G. AHRENS GmbH
Management & Staff

e-Mail: info@egah.de		 Wendenstr.29
20097 Hamburg
Germany

telephone: +49.40232384
facsimile: +49.40232387

 

 

  

Distributor

Wanted
 
 
Top Offer of the Week
  • Spinach Processing Line
    		•
    Newsletter Sign up
    name:
    e-Mail:
    country:
     
    Please click here if you wish to unsubscribe from our newsetter.
    Contact
    ERNST G. AHRENS GmbH
    Management & Staff
    e-Mail: info@egah.de

    Süderquerweg 267 B
    21037 Hamburg
    Germany

    telephone: +49.40232384
    facsimile: +49.40232387
    Date:01.08.2010 07:19:32
    Version: 1.241
         

     

    contact: telephone: +49.40232384 facsimile: +49.40232387 e-Mail: info@egah.de
    Impressum © 2006 Ernst G. Ahrens GmbH